Concrete Pharmacy® FIBER
PRODUCT DESCRIPTION:
Designed for use with Rapid Set® cement products and most other packaged hydraulic cement products, FIBER reinforcing additive increases impact resistance and controls shrinkage cracking in concrete, mortar, and grout mixes. FIBER is ideal for applications where secondary reinforcement is required.
USE:
With each bag of Rapid Set® Mortar Mix (55-lb. bag), Grout (55-lb. bag), Concrete (60-lb. bag), and DOT Repair Mix (55-lb. bag) use 1 to 4 packets of FIBER to achieve the required reinforcing properties for your mix. FIBER may be used in combination with all other products of the Concrete Pharmacy®.
DIRECTIONS:
Add FIBER during the initial mixing of your cement product. Follow product mixing instructions described on the package of your cement product. Do NOT exceed 4 packets per 50 to 60 lb. bag of Rapid Set®. Do NOT add more water than recommended on the package of your cement product.
WARNING:
Keep out of reach of children. May cause skin, eye, and lung irritation. Avoid contact with skin, eyes, and clothing. Wear approved protective and safety respiratory equipment. Wash thoroughly after handling. Do NOT TAKE INTERNALLY. In case of contact, flush affected areas with water for 15 to 20 minutes. If inhalation effects occur, remove to fresh air. If irritation persists, seek medical attention. Wash contaminated clothing. Refer to Material Safety Data Sheet for more information.
LIMITED WARRANTY:
Seller warrants this product is free from defects in material and workmanship and this warranty will be limited to replacement of the product. IT IS EXPRESSLY AGREED THAT THIS LIMITED WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES OF FITNESS AND MERCHANTABILITY.