Non-Sag Textured Sealant (Gray)

Multi-Purpose Hybrid Silane Polyether 

Rapid Set® multi-purpose non-sag textured sealant is a single-component, multipurpose, fast curing, non-sag, UV stable sealant that provides exceptional durability, superior weather resistance, and excellent adhesion to a wide variety of texturized substrates. This high-performance sealant incorporates texturizing aggregate designed to complement most texturized surfaces. It is 100% solvent free, contains no isocyanates and will not shrink upon cure. Tack-free in 35 minutes and paintable in 24 hours. It has excellent adhesion to Kynar 500 (PVDF coated metal), galvanized metal, aluminum, glass, cement board, brick, concrete, stone, EPDM and SBS-modified bitumen membranes, EPS foam, roofing materials, fiberglass (FRP), vinyl siding, and masonry. Available in 10.1 fl oz tubes.



The Datasheet explains the performance and technical characteristics of Rapid Set® Non-Sag Textured Sealant.  It also shows how to use Non-Sag Textured Sealant (i.e. surface preparation, applying, filling cracks and joints, and curing).

Safety Information

The Safety Data Sheet (SDS) outlines information and procedures for handling and working with Rapid Set® Non-Sag Textured Sealant.  It includes physical and chemical property information, potential hazards, emergency procedures and CTS’s contact information.

Calculations and Charts
Leed Product Evaluation

TechnicalSupportWe are here to help. If you want to know which Rapid Set products to use for your project, how to set a post, how to fix something that didn’t turn out the way you expected, if we have a product for you to repair something that went wrong with someone else’s product, and where to find our products, let us know. Contact us at DIYSupport@ctscement.com or 800-929-3030.

ConcreteCalculatorFind out how much concrete to use before starting your project so that you’re not left with excess material. Use our Concrete Calculator to quickly and easily determine the amount of product you need.

ProductEvaluationLEED product evaluations summarize a product’s ability to contribute to a variety of LEED credits. These credits include Solar Reflectivity (SS7), Regional Materials (MR4), Recycled Content (MR5), VOC Content (EQ4) and Innovation in Design (ID1).

Skip to toolbar