For architects, contractors, engineers, DOT personnel, and other professionals who work on residential, commercial, industrial, or infrastructure projects.
Innovative, high-performance products for new construction, repairs and restoration.
Proven product solutions and resources for projects of any size, in any market.
Resources & Support
Professional resources designed to enhance your expertise.
Find A Dealer
Where to purchase Rapid Set® and Komponent® products.
For homeowners and do-it-yourselfers who like to DIY.
Professional-grade products for new construction, repairs and restoration.
Inspiration for your concrete projects — from repairs and restoration to decorative and fun.
Useful resources that help you become more knowledgeable about cement and concrete.
Find A Store
Where to purchase Rapid Set® products.
From A to Z
Alphabetical listing of Rapid Set® and Komponent® products
Innovative, high-performance products for repairs and restoration, flooring, grouting, pavements and overlays, stucco, shotcrete and fill, shrinkage compensating cement, sealants and adhesives, and additives.
CSI MasterFormat Divisions
CTS products organized by CSI MasterFormat subgroups and divisions.
We’re a close-knit group of employee-owners who are grateful for our customers, and the opportunity to provide the industry with innovative products and exceptional service.
With hard work and loyal customers, one repair and restoration product has grown into well over 70 building material products.
Rapid Set® cement products, made with calcium sulfoaluminate (CSA) cement technology. Komponent® shrinkage-compensating concrete products, made with Type K cement technology.
Learn about the speed, strength, and sustainability of Rapid Set cement products, and way to minimize cracking and reduce joints and curling with Komponent.
We’re the leadership team who is inspired by the mindset, work ethic, and integrity of our employee-owners.
We’re looking for the right people to join us. Perhaps that’s you.
FREQUENTLY ASKED QUESTIONS
Concrete repair begins with preparing the concrete surface, roughen the concrete surface and remove all damaged or contaminated concrete. Make sure the concrete repair surface is not contaminated by oil, paint, acids, dirt or other materials that will prevent a good bond. Immediately prior to placement, saturate the concrete repair surface with water then remove any standing water. After preparing the concrete surface proceed by mixing the Cement All concrete. Once Cement All concrete is mixed place and strike-off to desired level. Rapid Set is fast and does not bleed water so apply your final finish immediately after placing. Then water cure Cement All concrete repair area. The objective of water curing is to maintain a wet surface until the Cement All has achieved sufficient strength. Begin curing as soon as the surface has lost its moist sheen and continue for a minimum of 1 hour.
Rapid Set reduces the waiting time prior to coating. Under dry conditions, water based coatings such as latex paint can be applied after the products is hardened and dry which usually takes 4 hours. Solvent based and impermeable coatings such as oil based paint and epoxy can be applied in 16 hours.
In most applications, bonding agents are not required. Please follow surface preparation recommendations on Rapid Set products technical datasheets. If a bonding agent is required because these conditions cannot be met, or if the use of bonding agents is mandated, follow the bonding agent manufacturers recommendation for installation. Cement All and Mortar Mix have been successfully applied in conjunction with a wide variety of surface applied bonding agents, including epoxy systems. Selection and suitability of the bonding agent is the responsibility of the specifier and/or the installer.
Blending with other products may give unpredictable results and is not recommended. The use of Rapid Set approved additives and various colors are acceptable.
From 0 to 4 inches.
Cement All is air entrained except for the product made in California.
Cement All is a multi-purpose product. The most common applications are concrete repair, grouting, anchoring, casting, and underlayments.
Just add water. The use of a mechanical mixer such as a mortar mixer or drill mounted mixer is recommended. To maximize working time, organize work so that all people and equipment are in place before mixing.
Using traditional methods, place and strike-off to desired level. Rapid Set is fast and does not bleed water so apply your final finish immediately after placing. Organize your tools and people so you can work quickly. On flat work, fill to full depth and proceed horizontally. Do NOT place in layers.
Water cure all Cement All installations. The objective of water curing is to maintain a wet surface until the product has achieved sufficient strength. Begin curing as soon as the surface has lost its moist sheen and continue for a minimum of 1 hour.
You can increase the working time by lowering the mix temperature or using set retarding additives. Lower the mix temperature by keeping product cool and using chilled mix water. SET Control additive will increase working time and is available through our Concrete Pharmacy.
Yes. The color of Cement All can be modified by using dry and liquid powder pigments designed for use in cement mixes.
Roughen the surface and remove all damaged or contaminated concrete. Make sure the repair surface is not contaminated by oil, paint, acids, dirt or other materials that will prevent a good bond. Immediately prior to placement, saturate the repair surface with water then remove any standing water.
One bag of Cement All yields approximately 0.5 cubic feet. That's one square foot six inches deep. If you need an answer more specific to your application, use our Concrete Calculator.
Yes, Cement All is made with Rapid Set Cement which is a hydraulic cement. A hydraulic cement hardens under water.
Cold temperatures will slow the setting time of Rapid Set Cement All and warm temperatures will speed it up. Greater changes in temperature will have a more pronounced affect.
When stored in a dry location, in an undamaged package, Cement All has a shelf life of 12 months.
Either product can be used for repair. For non-moving cracks, Cement All and sealants products may be used. For moving crackings, sealants are better suited.