FREQUENTLY ASKED QUESTIONS

  • What is Komponent

    Komponent is a cementitious shrinkage-compensating additive that is combined with regional Type I, II, IV or V portland cement to create Type K shrinkage-compensating concrete, low shrinkage concrete, and non-shrink grouts.

  • Are there industry specs or guidelines that can be used as references for project specifications and construction detailing?

    Yes. ACI 223 - Guide for the Use of Shrinkage-Compensating Concrete and various ASTM standards (i.e., ASTM C845, ASTM C806 and ASTM C878) are available to guide engineers, design professionals, construction teams, and testing labs in the design, specification, performance and installation of Type K shrinkage-compensating cement concrete and non-shrink grout.

  • What makes shrinkage-compensating concrete different from ordinary concrete?

    Shrinkage-compensating concrete is engineered to fully compensate for the drying shrinkage characteristics of portland cement, aggregates, and other supplementary cementitious materials used in a concrete mix design. Komponent is a cementitious additive that improves the cement paste and provides shrinkage-compensation for the life of the placement. Its affects do not diminish over time.

  • Where can I use shrinkage-compensating concrete?

    Shrinkage-compensating concrete can be used for any concrete element or grouting project. From industrial, commercial, and institutional construction projects to mass elements, bridge decks, parking lots, pavement, sea walls and underground or submerged applications. Anywhere you can use portland cement concrete you can use Type K shrinkage-compensating cement concrete.

  • What can't shrinkage-compensating concrete do?

    Shrinkage-compensating concrete cannot overcome poor design or installation practices. As with all concreting projects, best practices must be used in structural designs, mix designs, installation practices, and curing methods.

  • What is the recommended joint spacing?

    Shrinkage-compensating concrete offers the most flexibility in design and joint spacing. With L:W ratios up to 3:1, joint spacing of long narrow spans like bridge decks can be extended up to 300 ft or more. Floor slabs are commonly spaced up to 150 feet with no control joints.

  • What are the steel requirements?

    Minimum reinforcement requirements are provided in ACI 223 - Guide for the Use of Shrinkage-Compensating Concrete, Section 5.2.2. "A minimum ratio of reinforcement area to gross concrete area of 0.0015 is desired." Minimum reinforcement is required to control expansion and maximize performance of the tensile and compressive stress in the concrete. No maximum reinforcement is defined. The amount of reinforcement has an inverse relationship to the expansion that can be achieved, with compressive stresses increasing as the amount of reinforcement increases.

  • Can we be guaranteed a crack-free project?

    Komponent offers every design and construction team the most reliable method of minimizing or eliminating drying shrinkage cracking and unsurpassed dimensional stability (eliminating curling, minimizing creep and moment, etc.). It cannot, however, overcome poor installation practices, insufficient structural design, or inadequate mix designs. ASTM C878 should be run on all mix designs to ensure dosages will meet performance requirements.

  • How are strengths affected when using shrinkage-compensating concrete?

    Komponent is based on an advanced CSA cement chemistry that improves both compressive and flexural strengths. Typically, strengths are improved by approximately 10-15% depending on the mix design used.

  • Why are the water/cement ratios higher?

    The advanced hydration mechanism of Komponent is different than that used by portland cement. This more efficient chemical reaction consumes mix water to create ettringite crystals. These crystals improve the quality of the cement paste and create expansion in the concrete. Water is needed for the chemical reaction that takes place during hydration so it is important not to starve Komponent of the water needed to achieve the designed expansion.

  • Does air entrainment react differently with shrinkage-compensating cement?

    Air entrainment additives react the same in shrinkage-compensating concrete as they do in portland cement concrete, and can be used successfully in regions that require air entrainment.

  • Why is there no bleed water?

    The advanced hydration mechanism of Komponent is different than that used by portland cement. This more efficient chemical reaction consumes mix water to create ettringite crystals. There is no "excess" mix water to find its way up and out of the concrete, effectively creating a more dense, less permeable concrete.

  • Is Komponent an admixture?

    Komponent is a cementitious additive used with portland cement. It is not a liquid admixture.

  • How is Komponent incorporated into the concrete mix?

    Komponent is batched into the concrete in the same fashion as other bulk, dry cementitious materials like fly ash, slag cement, etc. If project conditions require alternative methods to introduce Komponent, portable silos, slurry machines, and other standard industry equipment can be used. Contact CTS for project assistance.

  • Why is there two yards less concrete in the truck?

    Shrinkage-compensating concrete is often batched in 8- or 9-yard loads to allow sufficient room in the barrel to thoroughly incorporate Komponent into the mix prior to discharge.

  • Where is Komponent available?

    Komponent is available nationwide and internationally. It is sold direct to market. Interested customers can contact our corporate office or a member of our Engineering Sales Team and we will help facilitate the order.

  • What unit sizes are available?

    Komponent is available in bulk rail or tanker trucks, 2000-lb super sacks, 90-lb bags and 50-lb bags.

  • Will producing Type K shrinkage-compensating concrete disrupt my operation?

    When introduced as a bulk cementitious material, normal production operations are not affected. If alternative means of introduction are required, operations are evaluated and the most efficient method is used to ensure minimal disruption to operations and installation efficiency.

  • What do I do with the leftover Komponent?

    If bulk Komponent or bags of Komponent are left over from a project, the material can easily be used in a non-shrink grout mix.

  • What if Komponent sticks to fins of my drums on my concrete trucks?

    If Komponent is batched into the concrete during the normal batching process, residual concrete on the fins will be minimal and similar to that of portland cement concrete. If alternative methods are used, directing the cementitious additive into the center of the barrel will help prevent sticking to the fins.

  • How do I store Komponent?

    Bulk Komponent should be stored in a sealed bulk storage container like a silo or rail car, and protected from adverse environmental conditions and moisture. Bags of Komponent must be stored in a dry location, protected from moisture, out of direct sunlight, and protected from damage to packaging.

  • Do I need special tools or knowledge to place Komponent?

    Traditional means, methods and best practices for concreting are used with shrinkage-compensating concrete. However, it is not "just like portland". As with any additive or SCM used in a concrete mix design, understanding how Komponent affects the mix is important for the producer, and the placing and finishing teams. Understanding the most effective means of adjusting set time and slump is important. And ensuring installation teams understand they should not wait for bleed water before finishing, and the timing of wet cure need to be understood prior to the pour. A pre-pour meeting goes a long way to ensuring efficiency during production and placement, as well as successful finishing and curing processes.

  • Can we add water at the jobsite?

    Water is only added at the plant during the batching process. If slump adjustments are needed on site, plasticizers should be used.

  • Will shrinkage-compensating concrete blow up the forms with the expansion?

    No. The expansion created by shrinkage-compensating concrete is restrained by the reinforcement in the concrete (traditional rebar, microfibers, or micro-rebar). Estimates of maximum member expansion relative to the amount of reinforcement used in the concrete element can be evaluated in ACI 223 Fig. 5.1.